Single Shallow 10″ Sealed Subwoofer Enclosure, Loaded with Wavtech thinPRO10
$849.99
Sealed box for a single 10-inch subwoofer: 0.4 cu ft net, Qtc 0.822-0.870, up to 2.875 in mounting depth.
Single Shallow 10″ Seale...
$849.99
Single shallow 10-inch sealed subwoofer enclosure loaded with Wavtech thinPRO10: 0.4 cu ft net, Qtc 0.822-0.870, F3 44.5 Hz.
A Qtc of 0.822-0.870 adds a little lift before the response rolls off: more impact than a textbook alignment, still tidy on fast bass lines.
It is built shallow for tight spaces, so check the mounting depth figure below against your driver.
Listed construction: 3/4-inch MDF, dado and V-groove panel joints, black carpet, polyfill installed, pre-wired terminal cup.
Your subwoofer's mounting depth needs to be 2.875 inches or less. Choose Single 2 Ohm or Single 4 ohm in the order notes. Tell us which subwoofer you run and we will confirm the match first.
Questions about fit? Message us on WhatsApp.
Box specifications
| Type | Sealed |
|---|---|
| Drivers | Single, 10-inch |
| Net volume | 0.4 cu ft |
| System Qtc | 0.822-0.870 |
| F3 (anechoic) | 44.5 Hz |
| Max mounting depth | 2.875 in |
| Baffle | 3/4 in MDF |
| Loaded with | Wavtech thinPRO10 |
